Japanese Gennou

IMG_0019.JPG
IMG_0031.JPG
IMG_0034.JPG
After drying out the gumi for a few weeks it was finally time to fit the head. Filed a chamfer on the underside of the gennou head and did my best to trim the tenon so that it was tight but not too tight. Difficult work to do with just a block planeā€¦

After drying out the gumi for a few weeks it was finally time to fit the head. Filed a chamfer on the underside of the gennou head and did my best to trim the tenon so that it was tight but not too tight. Difficult work to do with just a block plane and a chisel. It Took about 30 or so good thwacks or so to get it on, I had hoped to get it on a little deeper but I can live with it as is. If it loosens up in the future I'll have room to drive it down further. Once set, I applied a little tung oil to the end to swell things up, I was surprised how much the gumi took in. Should have the final shaping done this week, then it's on to setting up my Ouchi yama-ari oire-nomi.